Hardware Products

 

 

 


Adhesive Spreader - (AS5)
Description: Adhesive Spreader

Rider & Bell - Adhesive Spreader - (AS5)



Angle Bracket - Stayed - (ANG-BKT-ST)
Description: Angle Bracket - Stayed. BS Series Sizes: 250mm x 200mm, 300mm x 300mm, 375mm x 375mm, 500mm x 400. (10 per box).

Rider & Bell - Angle Bracket - Stayed - (ANG-BKT-ST)



Angle Bracket - Unstayed - (ANG-BKT-UNST)
Description: Angle Bracket -Unstayed. Galvanised. BU Series. Sizes: 75mm x 75mm, 100mm x 100mm, 125mm x 125mm, 150mm x 150mm. 10 per box.

Rider & Bell - Angle Bracket  - Unstayed - (ANG-BKT-UNST)



Angle Bracket - Light Duty - (ANG-BKT- LD)
Description: Angle Bracket -Light Duty. Zinc Plated. BL Series. Sizes: 38mm x 38mm, 50mm x 50mm, 63mm x 63mm, 75mm x 75mm. 10 per pack; 100 per box.

Rider & Bell - Angle Bracket  - Light Duty - (ANG-BKT- LD)



Angle Bracket - Chunky - (ANG-BKT- CH)
Description: Angle Bracket - Chunky

Rider & Bell - Angle Bracket  - Chunky - (ANG-BKT- CH)



Brass Drifts - (BR-DR)
Description: Brass drifts are made from special brass rod and come various diameters and lengths, as required.

Rider & Bell - Brass Drifts - (BR-DR)



Door Clamp - (DOOR-CLP)
Description: Door Clamp. This enables work to be done on doors, whether vertically or horizontally, and does not require any extra support to hold door in place. Excellent for fitting hinges.

Rider & Bell - Door Clamp - (DOOR-CLP)



G Clamp - PO5 - (G-CLP-PO5)
Description: Used by handymen and tradesmen to clamp work pieces together.

Rider & Bell - G Clamp - PO5 - (G-CLP-PO5)



G Clamp - PO12 - (G-CLP-PO12)
Description: Used by handymen and tradesmen to clamp work pieces together.

Rider & Bell - G Clamp - PO12 - (G-CLP-PO12)



Clamp - (GLU-CLP-PO10)
Description: PO10 -Gluing Clamp -3/4". Also called Paulcall Gluing Clamp. For use with 3/4" threaded water pipe of any desired length. (Pipe not included) Acme thread screw (with crank handle) provides 63mm (2 1/2") adjustment. Spring lever control locks sliding jaw at desired location. Ideal for home workshops, carpenters, pattern makers, and for any trade, school, industrial and home work that needs to be clamped. Examples of use: gluing panels, repairing sash and doors, welding metals, clamping furniture, fabricating frames and restoring antiques.

Rider & Bell - Clamp - (GLU-CLP-PO10)



Hinge - (HINGE - CUP)
Description: Cupboard Hinge (270 degree)

Rider & Bell - Hinge - (HINGE - CUP)



Hinge - (HINGE - BOLT)
Description: Bolt On Style Hinge. For steel gates and doors.

Rider & Bell - Hinge - (HINGE - BOLT)



Hinge - (HINGE - WELD)
Description: Weld On Style Hinge. For steel gates and doors.

Rider & Bell - Hinge - (HINGE - WELD)



Hinge - Gate - (HINGE-GAT)
Description: Strap gate hinge. For timber gates and doors.

Rider & Bell - Hinge - Gate - (HINGE-GAT)



POST SUPPORT - (POST-SUP)
Description: Post supports come in various styles and sizes. Used in the building industry to support timber posts.

Rider & Bell - POST SUPPORT - (POST-SUP)



Quick Action Clamp - Heavy Duty - (QAC-HDQ)
Description: Quick action clamp - heavy duty. Used by tradesmen and handymen to clamp work pieces together. Stem made from 30 x 8mm steel. Various sizes: HDQ9 230mm x 120 throat, HDQ12 300mm x 120mm throat, HDQ16 400mm x 120mm throat, HDQ20 500mm x 120mm throat, HDQ24 600mm x 120mm throat, HDQ30 750mm x 120mm throat, HDQ36 900mm x 120mm throat.

Rider & Bell - Quick Action Clamp - Heavy Duty - (QAC-HDQ)



Quick Action Clamp - Light Duty - (QAC-LD)
Description: Quick Action Clamp - Light Duty. Used by tradesmen and handyment to clamp work pieces together. Come in various sizes and styles.

Rider & Bell - Quick Action Clamp - Light Duty - (QAC-LD)



Saw Horse (pair) - (SAW-H)
Description: Safety Lock Fold Away Saw Horse (pair). Used by tradesmen and handymen to assist with hanling requirements and work preparation. Saw horses stand 565mm high and have a timber top made from 90mm x 35mm baltic pine, supported by 3mm galvanised plate. Carton contains 2 unassembled saw horses.

Rider & Bell - Saw Horse (pair) - (SAW-H)



Saw Horse Extension Legs (pair) - (SAW-H-EXT)
Description: Saw Horse Extension Legs - Pair. Extends the height of saw horses by 266mm. Suitable for market stall tables.

Rider & Bell - Saw Horse Extension Legs (pair) - (SAW-H-EXT)



Spring Clamp - (SPR-CLP)
Description: Spring Clamps are made in 3 different sizes. Some of the uses are for builders, riggers, the film industry. and for any clamping requirements.

Rider & Bell - Spring Clamp - (SPR-CLP)



Tool Bench - (TOOL-B)
Description: Tool Bench. Modular steel system to suit any work configuration. Ideal for mechanics, panel beating shops, domestic, electrical or high production efficiency requirements. Many styles and designs.

Rider & Bell - Tool Bench - (TOOL-B)



Work Bench - (WORK-B)
Description: Work Bench. Modular steel system to suit any work configuration. Ideal for mechanics, panel beating shops, domestic, electrical or high production efficiency requirements. Many styles and designs.

Rider & Bell - Work Bench - (WORK-B)